How much does it cost to have an electrician install a ceiling fan?

It costs around $150 - $400 to have an electrician install a ceiling fan . The price can vary depending on: The type of fan you want installed. If you are replacing an existing fan. If you want lights and dimming features installed. When it comes to installing a fan, it will usually be cheaper to have a ceiling fan installed when a ceiling fan or a light already exists where you want your new ceiling fan installed. To get a ceiling fan installed in your home, contact us today .

How hard is it to replace a ceiling fan?

It is fairly simple to replace a ceiling fan with the same type of fan . However, the replacement becomes more difficult if you are replacing your old fan with a newer or heavier fan , or want to also install lights with your ceiling fan. If you are replacing your fan with the same type of fan, all of the supports and wiring will already be in place so the replacement should be fairly easy if you have the correct electrical knowledge. To get a ceiling fan installed, call us today .

Why are some of my outlets and lights not working near Sarasota?

If one or more outlets in your home stop working and your circuit breaker is not tripped, a GFCI (Ground Fault Circuit Interrupter) might be the culprit. When there is an electrical imbalance, GFCI outlets trip significantly faster, protecting people from electrocution. If you press the "test" button and nothing happens, the GFCI has tripped. You may restore power to the outlet and any outlets downstream by pressing “reset” until you hear it click. Other difficulties that may arise include faulty wiring or loose outlets. Wiring and screws can loosen over time. When an outlet fails, it might affect several outlets or lights around the house. Most homeowners are capable of tightening outlet screws on their own. If faulty wiring appears to be the source of the problem, contact us for assistance. In the United States, loose wiring is the third biggest cause of home structure fires.

How much does an electrician cost to fix an outlet near Sarasota?

Electricians generally charge less than $100 for a house visit and a variable hourly fee for labor. Typically, the cost of replacing old electrical outlets is around $125 for parts and labor. If the electrical wiring from the original outlet is still intact, this is a quick and straightforward project. You may expect to pay between $200 and $250 if the ground wire is cut or new wires need to be hooked to the outlet.

Can you rewire a house yourself?

No. Unless you are a trained electrician, you should never attempt to rewire a house yourself. Completing electrical work is a risky endeavor. Electrocution, shock and fires might occur when completing electrical rewires. These risk factors have the potential to cause significant harm or even death. Every year electrical components and systems are responsible for over 51,000 house fires in the United States alone. For your safety, always have a licensed electrician perform your home rewiring project!

How much does it cost to replace an electrical panel?

Depending on the amperage, the typical cost to replace an electrical panel ranges from $850 to $2,500. A 100-amp service panel upgrade costs between $850 and $1,600, a 200-amp breaker box replacement costs between $1,800 and $2,500, and a 400-amp electrical service upgrade costs between $2,000 and $4,000. Total expenses are determined by the kind of residence, the number of circuits, and the amperage.

How much does it cost to have an electrician install recessed lighting?

An electrician would typically charge between $200 and $250 per fixture to install recessed can or canless LED lights. There may also be an hourly charge to take into account. Professionals charge $85 to $105 per hour, and each recessed lighting installation takes around 2 to 2.5 hours.

What are the different types of electrical installation?

There are many types of electrical installation. If you’re building a new home, your home will require an initial installation of wiring and electrical panel, called a rough-in. The rough-in is done after framing but before drywall installation. After drywall and in existing homes, electrical installations can include lighting installation, installing outlets and switches, generator installation, surge protection or adding an EV car charger.

What is the average price for electrician services in Fort Myers, FL?

The average price for electrical services in Fort Myers, FL is around $150-$400 . Some things that cause the price to fluctuate are: The type of electrical project or repair. The electrician’s hourly rate. The cost for any parts or wiring. The cost of the electrical service will largely depend on the complexity of the electrical project or repair. To learn more about our electrical services , give us a call today .

How do I know if my circuit breaker box is bad near Fort Myers, FL?

A few ways to tell if your circuit breaker box is bad in Fort Myers, FL include: The lights in your home flicker. Your circuit breakers trip often. You receive electric shocks when you touch your switches and outlets. You notice strange noises or smells coming from the breaker box. If you have an older home and you suspect your breaker box hasn't been replaced in the past 30 years, then you should have it replaced. If your electrical panel is old, it will most likely not protect against potential electrical fires as well as a newer one will. Additionally, a newer circuit breaker box is better equipped to power your home. To get your circuit breaker box replaced , contact us today .

Are GFCI outlets required in Fort Myers, FL?

Yes, GFCI outlets are required in Fort Myers, FL in any spot of your home that has the potential to get wet. You will need a GFCI outlet in your kitchen, laundry room, bathroom, basement, garage and any outlet that is within six feet of a sink or source of water. GFCI outlets were created to ensure the safety of your home from potential electrical hazards, making them a necessity. To find out more about getting GFCI outlets installed in your home, contact us today .

Do you need an electrician to install a ceiling fan near Punta Gorda?

Yes, you should have an electrician install a ceiling fan in Punta Gorda, FL . Replacing a ceiling fan can be simple, but installing a new fan and the wiring for it can be complex. Getting an electrician to install your ceiling fan ensures that it is installed properly and is up to code. Additionally, installing a ceiling fan becomes even more difficult when you want to install lights and dimming switches. To get your ceiling fan installed , give us a call today .

Is it dangerous for a ceiling fan to wobble?

It can be dangerous for a ceiling fan to wobble , depending on what the cause is. Ceiling fans will typically wobble slightly, but should not be wobbling excessively, especially when they are off. If you turn off your fan and you are able to move it back and forth, that may indicate that there is an issue with the fan’s mount. Regardless of what is causing your ceiling fan to wobble, you should turn off your ceiling fan and have the problem addressed before you continue using your fan. To get your ceiling fan repaired , give us a call today .

Should I rewire my Punta Gorda home myself?

No, you should not rewire your Punta Gorda home yourself unless you have extensive electrical knowledge and experience. The benefits of having an electrician rewire your home for you are: The project does not take as long. The work is under warranty. The installation is done by an electrician with knowledge of proper electrical code. Getting your house rewired by an electrician is expensive, but worthwhile. Trying to rewire your home yourself can be dangerous, as well as time consuming. Call us today to get your home rewired .

How long does it take an electrician to wire a house near Punta Gorda, FL?

It takes an electrician about 3-10 days to wire a house in Punta Gorda, FL . Some things that can cause the time to vary are: The size of the home. The age of the home. Whether it is a new home or one with existing wiring. If you are planning on having your entire home rewired, you should create arrangements to stay with family or friends for the duration of the project. To learn more about getting your house wired , contact us today .

How much does an electrician cost near Punta Gorda?

The average cost of hiring an electrician is around $75 per hour, with average rates ranging from $50 to $100 per hour. The hourly pricing for hiring an electrician is determined by the electrician's level of expertise and the type of work to be performed. More involved improvements, such as replacing an electrical panel or rewiring the house, might cost anywhere from $2,000 to $6,000 or more.

Why did my electrical outlet stop working near Punta Gorda?

A faulty connection may have caused your outlet to cease operating. A box is used to install outlets, and this box may have problems such as a loose connection or broken screws. The outlet will stop working if the outlet's box cannot deliver adequate electricity. The symptoms of a faulty connection are almost exactly like those of defective wiring. The difficulty of diagnosing the problem without the assistance of an electrical specialist is too much for most DIY'ers. If you suspect that your outlet does not have a proper connection, contact a professional electrician for a more thorough examination.

How do you fix a tripped electrical breaker that won’t reset near Punta Gorda?

First and foremost, double-check that you're resetting the breaker correctly. Make sure you're pressing the breaker handle all the way to the off position before returning it to the on position. A circuit breaker that trips repeatedly is a sign of an overloaded circuit. An overloaded circuit is generally caused by too many heavy loads being put into the same receptacles or outlets on the same circuit, or by a defective appliance being plugged into the circuit. The best way to solve overloaded circuits is by upgrading your electrical panel .

Can I install an EV charger in my home?

No, a licensed electrician must install your EV charger. You can use the charging cable that comes with the car with a regular household outlet - this is called a Level 1 charging device . A Level 2 devices employ 240-volt circuits, the same type of electrical circuit used in clothes dryers, and requires an electrician to install a dedicated circuit along with the EV charger. A Level 3 charging station may easily cost $50,000 and is intended for business usage. Even if you had that type of money to spend, your electric company is unlikely to allow the installation of a Level 3 charger in your house since the electrical infrastructure in many residential locations will not support it.

How much does it cost to install an EV charging station in my home?

A wall-mounted system with a Level 2, 240-volt outlet is one of the most typical EV charging stations. These systems range in price from $850 to $2,200, with an average cost of $1,200 for your Cape Coral area home. A preliminary walk-through with an electrician should give you a fair sense of the whole cost. The typical cost of any electrical service rises when more work is necessary, such as: Adding a dedicated circuit to the electrical panel costs between $148 and $200. The cost of replacing an outdated electrical panel is $2,500. Wiring costs and average of $7.79 per linear foot from the charging station to the electrical panel.

What are the benefits of an at-home EV charging station?

You can charge your electric vehicle effectively and quickly from the comfort of your own home with a rapid EV charger. That means you'll never have to worry about not being able to find a charging station. With a constant charging cycle, you can fit your car's charging demands into your schedule and never worry about finding a charging station again.

How do I ensure the ceiling fan is balanced?

To ensure a ceiling fan is balanced, first, check that all blades are securely attached and at equal distances from the ceiling. If wobbling persists, use a balancing kit , which typically includes weights and a clip. Attach the clip to different blades to identify the unbalanced one. Once identified, move the clip along the blade to find the precise imbalance location. Affix the included weights to the top of the blade in this spot to balance. Repeat adjustments as necessary until the fan operates smoothly without wobbling.

What residential lighting services does Federal Electric offer near Cape Coral?

Federal Electric offers the following residential lighting services near Cape Coral, FL : Interior and exterior lighting installations. Custom lighting installations and design. Interior and exterior lighting repair. Interior and exterior lighting replacement. When it comes to your lighting needs, we offer many lighting options to suit your needs. If there is a type of lighting that you are thinking of getting installed in the interior or exterior of your home, give Federal Electric a call to learn more about how we can make your lighting project possible.

Do you need an electrician to replace a light fixture near Cape Coral?

You do not need an electrician to replace a light fixture near Cape Coral, FL . If you are going to replace a light fixture yourself, ensure that you: Turn off the power supply to the fixture. Have the correct parts and tools. Have enough electrical knowledge to replace the fixture. If you do not have the correct tools and knowledge or do not feel comfortable replacing your own light fixture, you should have an electrician replace it for you. To get help replacing your light fixture, contact us today .

Do you need an electrician to install a ceiling fan near Cape Coral?

Yes, you should have an electrician install your ceiling fan near Cape Coral, FL . Installing a ceiling fan is much more complex than replacing a ceiling fan, especially when you also want lights with dimming switches installed with your ceiling fan. Having an electrician install your ceiling fan ensures that the correct wiring is installed and that the entire installation is up to code. Call us today to get your ceiling fan installed .

What devices can I integrate into a smart home system?

A wide range of devices can be integrated into a smart home system, offering convenience, efficiency, and automation. Common devices include smart thermostats, lighting controls, security cameras, door locks, smart plugs, smart switches, smart speakers, smart TVs, appliances, and even motorized window shades. Additionally, sensors such as motion detectors, door/window sensors, and water leak detectors can enhance safety and security. Many of these devices can be controlled remotely via smartphones or voice commands, allowing homeowners to customize their smart home experience to suit their needs and preferences.

Do you need an electrician to install a light switch?

Yes, you should always have a professional electrician install your light switches. An electrician will ensure that your project is done accurately, safely and effectively, whether it is repairing an old or defective switch, installing a switch to operate a freshly wired fixture, upgrading to a light switch with unique capabilities or just switching out switches to fit a new color scheme.

What are the 3 types of switches used in residential electrical?

Single-Pole Switch: This switch is your basic general-purpose switch and is regarded as the "workhorse" of switches. It is used to operate a light, outlet or other device from a single location. Single-pole toggle switches frequently have "on and off" marks that other switches do not have. Three-Way Switch: Three-way switches are always used in groups of two. They provide control of a light or receptacle from two distinct points in the space, such as two separate entryways. Because the locations of these switches vary as they are utilized, they cannot have on/off marks. Double-Pole Switch: The double-pole switch is most commonly used in industrial settings, although it may also be found in home electrical systems. A double-pole switch, like the single-pole switch explained above, has on/off indications and controls equipment or fixtures from a single position. A double-pole switch, however, also contains four hot brass terminals as well as a ground terminal.

What are the common types of electrical switches?

Other frequently used switches, in addition to the three primary home switches described above, include: Light Dimmer / Stepless Regulator: Used to control or adjust the speed of a fan or, in some cases, the intensity of light from brilliant to dim. Previously existing regulators rotated in steps, each step signifying a different degree of fan speed, but the Light Dimmer/Stepless Regulator allows you to freely rotate it without any stages or levels. Bell Push Switch: A doorbell is linked to a Bell Push switch. When the switch is pressed, the bell linked to it rings. It may be utilized in homes, offices or any other location where it is needed.

What is the difference between recessed lighting and can lights?

There is no difference between recessed lighting and can lights because they are the same type of light fixture. Can lights and recessed lighting are both names for the type of lighting that involves a can shaped fixture mounted in the ceiling. If you are searching for a fixture that has a smooth appearance and can fit into any room, you can find it by searching recessed lighting or can lights. To get recessed lighting installed in your home, give us a call today .

What electrical services does Federal Electric provide?

Federal Electric provides commercial and residential services for any of your electrical needs, including but not limited to: Repairs Installations Ceiling Fans Rewiring Surge Protection Appliances Electric Vehicle Chargers Lighting Solutions Generators Panel Upgrades And more! Have an electrical service need but don’t see it listed? Contact us today and, chances are, we can still help!

What are the benefits of recessed lighting near Cape Coral?

Some of the benefits of getting recessed lighting in Cape Coral, FL include: They take up less space. They are a safer option compared to hanging lights. They make a room feel brighter. Recessed lights are a great way to switch up the lighting style in your home, especially because the design will not become outdated like other light fixtures. Additionally, with recessed lighting, you do not have to worry about them building up dust or getting broken as easily. To get recessed lighting installed in your home, contact us today .

How much does recessed lighting cost near Cape Coral?

It costs around $250-$500 per fixture to have recessed lighting installed in Cape Coral, FL . Some things that can affect the overall price include: The type of trim. The type of light bulbs. The electrician’s hourly rate. Another thing that will cause the price to increase would be if you also want a dimming option included in your recessed lighting. To find out more about getting recessed lighting installed in your home, call Federal Electric today .

What constitutes an electrical emergency?

The following typically constitute an electrical emergency : Your power is out Your outlet is overloaded Your circuit breaker is not working properly In most cases, if you feel that your electrical issue is an electrical emergency, it is. When in doubt, you should call an electrician and they will be able to determine if the issue you are experiencing is an electrical emergency. To find out more about our emergency services, contact us today .

Should electrical plugs get hot?

No, electrical plugs should not get hot . If your outlet is hot, that can be an indication of loose or faulty wiring that should be addressed right away. A hot outlet can pose a huge risk if it becomes too hot or there is an electrical shock, as it can lead to an electrical fire. If you notice your outlet is hot to the touch, you should remove anything that is plugged in and have an electrician inspect the outlet to determine what the exact issue is. Call us today to get your electrical outlet checked .

Is it dangerous if a circuit breaker keeps tripping?

Yes, a circuit breaker that keeps tripping can be dangerous . If your circuit breaker keeps tripping, that indicates that there is a deeper issue with your electrical connections. A circuit breaker will typically trip due to a short circuit, an overloaded circuit or faulty wiring. Each of these issues should not be ignored, as they can lead to safety issues with your home’s electrical connections. To get your home’s electrical issue fixed, give us a call today .

How fast can you respond to an electrical emergency?

Your safety is our top priority at Federal Electric. In the event of an electrical emergency, our committed staff is ready to help around the clock, with our 24/7 emergency service. Our first concern is meeting your urgent demands, and we'll respond quickly and effectively to remedy any electrical issues.

How can I prevent electrical emergencies?

To prevent electrical emergencies, ensure regular maintenance and professional inspections of your electrical system. Update old wiring and replace outdated appliances or devices that could pose risks. Avoid overloading circuits by using power strips and extension cords sparingly. Install surge protectors to shield home electronics from voltage spikes. Additionally, be aware of the signs of electrical problems, such as frequent breaker trips or flickering lights, and address these issues promptly with a licensed electrician.

Do whole house surge protectors really work?

Yes, whole house surge protectors really work . Whole house surge protectors prevent strong electrical surges from reaching your home by absorbing the power from the surge. They can help protect your whole house’s electrical circuits from becoming damaged by a strong electrical surge. Whole house surge protectors are especially useful if you have valuable appliances and electrical systems you want protected in the case of a surprise electrical surge. To get a whole house surge protector installed in your home, call us today .

Can I install a whole house surge protector myself?

It is recommended that you have an electrician install a whole house surge protector for you. Installing a whole house surge protector requires you to work with the main electrical panel in your home which contains high levels of voltage. If you are not highly skilled in electrical work and do not have the correct knowledge of electrical code, installing a whole house surge protector yourself can be very dangerous. To get a whole house surge protector installed in your home, contact us today .

How much does it cost to install a surge protector near Cape Coral FL?

It costs around $300-$900 to install a surge protector in Cape Coral, FL . The overall cost can be affected by: The type of surge protector you want. The amount of amps your electrical panel has. The contractor’s hourly fee. Although getting a surge protector installed can be costly, it provides many benefits. When you have a surge protector installed, you can be rest assured that your appliances will not be damaged in the case of a strong power surge. To get a surge protector installed in your home, call us today .

Where does Federal Electric provide service?

While based in Cape Coral, FL , Federal Electric serves most of Western Florida, including Tampa, Naples, Fort Myers, Port Charlotte and Sarasota . Check out some of our reviews from these areas, or contact us today to inquire about your specific location!

How do I stop a power surge in my Cape Coral area house?

To protect your home against a power surge in your Cape Coral area house, you can: Get a whole home surge protector installed. Unplug valuable electronics during storms. Use outlet strips with surge protectors. Whole house surge protectors are the best way to fully protect your home against strong power surges, since they absorb the surge before it reaches your home. To get a whole house surge protector installed, give us a call today .

What type of whole house surge protector do I need?

To determine what type of whole house surge protector you need for your home, you should consider how much voltage your home supports and the features you will need in a surge protector. You will also want to take into account the absorption rate and the maximum continuous operating voltage (MCOV) of the whole house surge protector. To ensure you pick the best whole home surge protector for your home, you should have a licensed electrician evaluate your home’s needs for you. To get a whole house surge protector installed, call us today .

Where should surge protection be installed?

A surge protector should be installed between the live power and ground . The amount of surge protectors you will need will also affect where you will install them. Generally, a surge protector will be installed near or inside your home’s electrical panel. Surge protectors are a great way to protect your electrical systems. Whole home surge protectors can provide additional protection for your home. To get a surge protector installed, give us a call today .

Can a whole house surge protector protect against lightning strikes?

A whole house surge protector can offer a good level of protection against lightning strikes by diverting excess voltage away from your home's electrical system. However, it is not foolproof and may not completely protect against a direct or very close lightning strike due to the extremely high energy involved. For maximum protection, it is recommended to use a layered approach, combining whole house surge protection with point-of-use surge protectors for critical devices. Regular maintenance and inspections can ensure optimal performance.

What is the average cost to upgrade an electrical service panel?

The average cost to upgrade an electrical service panel is about $500-$4,000 . The price can vary depending on: How many amps you want your electrical panel to have If new wiring is required The contractor’s hourly rate Although upgrading an electrical panel can be expensive, it is very worthwhile. If you have your home remodeled or purchase a large appliance that requires more power, it is smart to get your electrical panel upgraded to account for the additional power your home will require. Call us today to get your electrical panel upgraded.

Can a homeowner replace an electrical panel?

A homeowner should not replace their own electrical panel . In some locations, you can obtain permits to replace your own electrical panel, but it is strongly recommended that you have a professional electrician perform the replacement for you. An electrical panel has much more electrical power running through it than a basic electrical outlet, making it dangerous to replace on your own if you are not familiar with the complex workings of your electrical panel. To get your electrical panel replaced, contact us today .

How do I know if my breaker box is overloaded?

Some ways to know if your breaker box is overloaded include: Your circuit breaker trips often Your circuit breaker’s components are hot Your hear a buzzing noise from your circuit breaker Another thing you should watch out for is if you begin to notice sparks or a burning smell coming from your breaker box. An overloaded breaker box is a safety hazard and should be addressed right away. To get your breaker box inspected, give us a call today .

Do I need a permit in Florida for an electrical panel upgrade?

Yes, you need a permit in Florida for an electrical panel upgrade. The permit ensures that the work complies with local building codes and safety regulations. Obtaining a permit involves submitting an application to your local building department and possibly undergoing an inspection before and after the work is completed. It's essential to hire a licensed electrician to handle the upgrade, as they are familiar with the permitting process and will ensure the job is done correctly and safely.

How much does it cost to install a plug socket?

It costs around $150-$300 to install a plug socket. Although, the price can vary due to: The type of plug socket. Whether it is an indoor or outdoor plug socket. The contractor’s hourly rate. Generally, it will cost more to have a plug socket installed if it is an outdoor plug socket or requires an upgrade to a GFCI or AFCI outlet. To learn more about getting a plug socket installed in your home, call us today.

10% off Panel Upgrade | Best Electrician in Cape Coral, FL

Name: Federal Electric Inc
Price range: $$
Rating: 4.9

10% OFF Panel Upgrade

If you need more panel space, Federal Electric can help. Upgrade your panel and save!

Available for a Limited Time Act now!

Print Coupon

$50 Off Ceiling Fan Installation

View Specials